Download Print this page

Radio Frequency Energy - Lindy 24 + 2Giga N-WAY SNMP Quick Installation Manual

Ethernet switch

Advertisement

Radio Frequency Energy

FCC Compliance Statement (United States)
This equipment generates, uses and can radiate radio frequency energy and if not installed and
used properly, that is, in strict accordance with the manufacturer's instructions, may cause
interference to radio communication.
It has been tested and found to comply with the limits for a class A computing device in
accordance with the specifications in Subpart B of part 15 of FCC rules, which are designed to
provide reasonable protection against such interference when the equipment is operated in a
commercial environment. Operation of this equipment in a residential area may cause
interference, in which case the user at his own expense will be required to take whatever
measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment.
Canadian Department of Communications RFI statement
This equipment does not exceed the class A limits for radio noise emissions from digital
apparatus set out in the radio interference regulations of the Canadian Department of
Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les
limites applicables aux appareils numériques de la classe A prescrites dans le règlement
sur le brouillage radioélectriques publié par le ministère des Communications du Canada
Tested to comply
with FCC Standards
LINDY No. 25030
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (MAY 2003)

Advertisement

loading