Typical Product Parameters - Invacare XPO100 Service Manual

TYPICAL PRODUCT PARAMETERS

IPX1
Electrical Requirements:
Rated Current Input:
Sound Level @ setting 2:
Altitude:
Oxygen Concentration:*
*Based on an atmospheric pressure of 14.7 psi
(101 kPa) at 70°F (21°C)
Oxygen Flow:
Dimensions:
Weight:
Part No 1150748
TYPICAL PRODUCT PARAMETERS
Direct Current
Type BF equipment
Attention - Consider Accompanying Documents
DO NOT smoke
Class II, Double Insulation
Power On/Off
DO NOT dispose of in household waste
Recycle
DO NOT use oil or grease
Keep dry
Protected against dripping water
AC Power Supply: 100-240 VAC 50/60 Hertz
DC Power Supply: 11-16 VDC
1.0 amps at 120 VAC
3.3 amps at 18 VDC
< 45dBA weighted
Up to 10,000 ft (3046 m) above sea level
87% to 95.6%, after initial warm-up period (approximately 5
minutes)
Pulse flow delivery. Bolus Volume Ranges From 300 - 840cc
settings 1 to 5.
10" high x 7" wide x 4" deep (25.4 cm high x 17.8 cm wide x 10.2
cm deep)
6.0 lbs (2.72 kg); 1.3 lbs (0.68 kg) for supplemental battery
5
XPO2™