And Z Reports - VeriFone Vx-520 Series APACS 40 User Manual

20/04/12
16:58:29
IP
↓
Password:
Reports
Reconcilia on
End of Shi (X)
End of Day (Z)
End of Shi (X)
End of Day (Z)
22
X and Z reports
Sale F1
1. From the main screen select Reports (F3)
Refund F2
2. The terminal will prompt for the supervisor
Reports F3
password. Key in the password and then
Reversal
F4
press the green
3. In the Reports Menu select End of Shift (F3)
for the X-balance or End of Day (F4) for the
F1
Z-balance.
F2
When a "X" report is taken, the terminal is
****** F3
"reading" the transaction value taken since the
F4
last X report. These reports are generally taken
during business hours to look at your sales totals
at any time of the day.
F1
"Z" reports the all of the sales totals taken since
F2
the last End of Day report was run. Totals will be
F3
reset back to zero after each Z report. Typically,
F4
the Z report is run when a business closes for
the day to get your sales totals for the day.
F1
F2
F3
F4
F1
F2
F3
F4
Enter
key.
V X -520 Series APACS 40 User Guide