Remote Control Features; Oil Pressure Indicator - Mercury Outboard Motor Service Manual

• Steering Friction Adjustment - Adjust this lever to achieve the desired steering friction (drag) on the tiller
handle. Move lever to the left to tighten, or move lever to the right to loosen.
a - Tighten
b - Loosen

Remote Control Features

Your boat may be equipped with one of the Mercury Precision or Quicksilver remote controls shown. If not, consult
your dealer for a description of the functions and operations of the remote control.
e
a
a - Control Handle - forward, neutral, reverse.
b - Neutral release lever.
c - Lanyard stop switch - Refer to General Information - Lanyard Stop Switch
d - Lanyard - General Information - Lanyard Stop Switch
e - Throttle friction adjustment - Console controls require cover removal for adjustment.
f - Ignition key switch - off, on, start
g - Fast idle lever - Refer to Operation - Starting the Engine
h - Throttle only button - Refer to Operation - Starting the Engine

Oil Pressure Indicator

The outboard is equipped with a low oil pressure indicator light.
If oil pressure drops too low, the red light will turn on. As an additional alert of the low oil pressure condition, the
engine will run rough and not exceed 2000 RPM.
FEATURES & CONTROLS
a
b
g
f
c
d
a
b
a
b
h
e
f
29
ob00546
e
ob00702