Heating Operation - Haier AU282AHBEA Service Manual

Heating operation

Note: For cooling only type, this function is invalid.
TEMP
ON
OFF
FAN
HEALTH
1
5
MODE
SLEEP SWING
CLOCK SET
TIMER
POWER/SOFT
HEAT
RESET LIGHT LOCK
Air flow adjustment
TEMP
ON
OFF
FAN
HEALTH
MODE
SLEEP SWING
CLOCK SET
TIMER POWER/SOFT
HEAT
RESET LIGHT LOCK
Press ON/OFF button
1
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press,operation mode
2
changes as follows:
AUTO COOL
Select Heating operation "
operation starts.
Select temp. button
3
Press TEMP button
Every time the button is pressed, temp. setting increases 1 C
Every time the button is pressed, temp. setting decreases 1 C
If the button is kept pressed, setting will increase or decrease quickly.
Press FAN button. For each press, fan speed changes as follows:
4
LOW
In heat mode,warm air will blow out after a short period of time due to cold-
draft prevention function.
Press ON/OFF button
5
Unit stops running, and when entering this mode for the next time, it will
show the previous setting.
Swing louvers
Up and down
(Horizontal louvers)
Position 1
Position 2
Position 3
Position 4
[COOL/DRY/FA
Position 5
N/AUTO(COOL)
HAVE NOT]
(AUTO SWING)
Position 6
>a__WcU[S^ <[c >a`V[e[a`Wc
DRY FAN
" appears and Heating
MID HIGH AUTO
Left and right
(Vertical louvers)
Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7
Position 8
-93-
HEAT
Swing
Press SWING the vertical
louvers move from left and right.
Fixed position
Press the SWING
fix the vertical louvers at your desired
position.
Swing
Press SWING the horizontal
louvers move from up to down.
Fixed position
Press the SWING
fix the horizontal louvers at your
desired position.
again to
again to