Dry Mode; Fan Mode - Haier AU282AHBEA Service Manual

Dry Mode

TEMP
ON
OFF
FAN
HEALTH
1
4
5
MODE
SLEEP SWING
CLOCK SET
TIMER
HEAT
LIGHT LOCK
RESET
Unit runs at the speed displayed on LCD.
In DRY mode, when room temp.becomes 2 C lower than temp. setting,unit will run intermittently at LOW speed
regardless of FAN setting.
Press ON/OFF butto nUnit stops running, and when entering this mode
5
for the next time, it will show the previous setting

Fan Mode

TEMP
ON
OFF
FAN
HEALTH
1
4
MODE
SLEEP SWING
CLOCK SET
TIMER
HEAT
RESET LIGHT LOCK
1 Press ON/OFF button
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press, operation mode changes
2
as follows:
Remote
AUTO COOL
controller
Select Drying operation shows"
Dry operation starts
Select temp. button
3
Press TEMP button
Every time the button is pressed, temp. setting increases 1 C
Every time the button is pressed, temp. setting decreases 1 C
If the button is kept pressed, setting will increase or decrease
quickly.
Press FAN button. For each press, fan speed changes as
4
follows:
Remote
LOW
controller
Press ON/OFF button
1
Unit starts running.The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press,operation mode
2
changes as follows:
Remote
AUTO COOL
controller
Select Fan operation shows "
Press FAN button. For each press, fan speed changes as
3
follows:
LOW
Unit runs at the speed displayed on LCD.
>a__WcU[S^ <[c >a`V[e[a`Wc
DRY FAN
"
MID HIGH AUTO
DRY FAN HEAT
", Fan operation starts.
MID HIGH
-99-
HEAT
COOL operation starts when room
temp. is higher than temp. setting.
Ultra-low air flow
Temp.setting+2 C
Temp.setting
On reaching 2 C lower than temp.
setting,unitwill run in mild DRY mode.