Troubleshooting Application Software Upgrade - H3C MSR 20 Installation Manual

Troubleshooting Application Software Upgrade

Symptom 1:
When upgrading the software using TFTP/FTP, the system displays:
=========================<ETHERNET PARAMETER SET>=========================
|Note:
|
|
==========================================================================
Protocol (FTP or TFTP) :tftp ftp
Load File Name
Target File Name
Server IP Address
Local IP Address
Gateway IP Address
FTP User Name
FTP User Password
Loading...Failed!
Solution:
Fault occurs because the source file does not exist, the network cable is not connected, or the IP address
of the PC is incorrect. Make sure that the source file is in the TFTP/FTP root directory, the cable is
connected securely, and the IP address is set correctly.
Symptom 2:
When upgrading the software using TFTP, the system displays:
=========================<ETHERNET PARAMETER SET>=========================
|Note:
|
|
==========================================================================
Protocol (FTP or TFTP) :tftp ftp
Load File Name
Target File Name
Server IP Address
Local IP Address
Gateway IP Address
FTP User Name
FTP User Password
Loading...
Done!
11487495 bytes downloaded.
'.' = Clear field.
'-' = Go to previous field.
Ctrl+D = Quit.
:host
:
:target
:
:192.168.1.1
:192.168.1.253
:0.0.0.0
:user
:password
'.' = Clear field.
'-' = Go to previous field.
Ctrl+D = Quit.
:host
:
:target
:
:192.168.1.1
:192.168.1.253
:0.0.0.0
:user
:password
68
|
|
|
|
|
|