See
Troubleshooting Software and Hardware
Lockups and Software Problems
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
The computer does not start up
Check the diagnostic lights —
See
Diagnostic
Lights.
Ensure that the power cable is firmly connected to the computer and to the electrical outlet
The computer stops responding
NOTICE:
You may lose data if you are unable to perform an operating system shutdown.
Turn the computer off —
If you are unable to get a response by pressing a key on your keyboard or moving your mouse, press and hold the power button for
at least 8 to 10 seconds (until the computer turns off), and then restart your computer.
A program stops responding
End the program —
1. Press <Ctrl><Shift><Esc> simultaneously to access the Task Manager.
2. Click the Applications tab.
3. Click to select the program that is no longer responding.
4. Click End Task.
A program crashes repeatedly
NOTE:
Most software includes installation instructions in its documentation or on a floppy disk, CD, or DVD.
Check the software documentation —
If necessary, uninstall and then reinstall the program.
A program is designed for an earlier Windows operating system
Run the Program Compatibility Wizard —
Windows XP:
The Program Compatibility Wizard configures a program so that it runs in an environment similar to non-XP operating system environments.
1. Click Start® All Programs® Accessories® Program Compatibility Wizard® Next.
2. Follow the instructions on the screen.
Windows Vista:
The Program Compatibility Wizard configures a program so that it runs in an environment similar to non-Windows Vista operating system environments.
1. Click Start
® Control Panel® Programs® Use an older program with this version of Windows.
2. In the welcome screen, click Next.
3. Follow the instructions on the screen.
Problems.