Mini Tower Computer Parts; Removing The Computer Cover - Dell OptiPlex 330 User Manual

Back to Mini Tower Contents Page
Back to Main Page
Mini Tower Computer Parts
Dell™ OptiPlex™ 330 User's Guide
Removing the Computer Cover
Memory
Cards
Bezel
Drives
Removing the Computer Cover
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, laceration by moving fan blades, or other unexpected injuries, always unplug your computer from
the electrical outlet before removing the cover.
CAUTION: Some of the parts described in this chapter may be replacable by a certified service technician only and are not custom replacable.
1. Follow the procedures in Before You
NOTE: Ensure that sufficient space exists to support the removed cover.
NOTICE: Ensure that you are working on a level, protected surface to avoid scratching either the computer or the surface on which it is resting.
2. Lay your computer on its side with the computer cover facing up.
1 security cable slot
3 padlock ring
3. Release the computer cover by pulling it away from the front of the computer and lifting it up.
4. Set the cover aside in a secure location.
Battery
Power Supply
Speakers
Processor
I/O Panel
System Board
Replacing the Computer Cover
Begin.
2 cover release latch