Table of Contents
Advertisement
3.01 Drilling Template (Top Flue Application)
Select suitable mounting position for boiler, using the template mark flue outlet and boiler mounting points. Drill
two 10mm holes 90mm deep to accept the wall plugs, fit wall plugs. Fit two special wall plugs on the wall as described
in the fig. 12a. Fasten the wall bracket to the wall using an antitheft nut on the right side and a standard nut (M8)
on the left side. Mount the boiler on the wall bracket and fix using an antitheft nut on the left side and a standard
nut (M8) on the right side. Using a core drill cut a 118mm diameter hole for the flue.
1. CH flow (22 mm)
2. Safety Valve (15 mm)
3. Domestic hot water outlet (15 mm)
4. Gas supply (22 mm)
5. Domestic hot water inlet (15 mm)
6. CH return (22 mm)
12
DOMINA 102 DGT
15
Ø3/4''
Ø1/2''
1 2 3
Ø120
=
=
jig bracket
Ø1/2''
Ø1/2''
Ø1/2''
Ø3/4''
4
5
6
460 min
Fig. 12a
15
0
2 0
5 min
Fig. 12b
Advertisement
Table of Contents
