Cord Instructions; Operating Instructions - Vinotemp VT-188 Owner's Manual

For your protection, this unit is equipped with a
3-conductor cord set that has a molded 3-prong
grounding-type plug, and should be used in
combination with a properly connected
grounding-type outlet as shown in figure A.
Caution: Do not use extension cords.
1. Place your wine cellar on a solid, flat surface that is strong enough to
support the unit when fully loaded.
2. This wine cellar is designed to be built-in (fully recessed) or free
standing.
3. Do not place heavy objects on top of the unit.
4. Do not place the unit in a moist place or display in direct sunlight.
5. Do not place the unit next to a major appliance that emits large
amounts of heat, such as a dishwasher, microwave, toaster oven,
oven or barbecue, etc.
6. Do not plug unit into the same outlet as a refrigerator or microwave.
7. The unit's cooling system operates efficiently with an ambient
temperature of less than 90°F when freestanding and 85°F when
built-in.
8. Do not install in a garage or basement.
9. Gently place/slide the racks in the wine cellar.
10. Determine the best temperature setting to use.
11. Place bottles inside the cooler.
12. Plug the power cord into a standard electrical outlet.
13. Limit the frequency of opening the door to conserve energy and
maintain proper storage temperature.
Important: When using the wine cellar for the first time, allow at
least 24 hours for the internal temperature to adjust properly, Make
sure there are at least 3 to 5 bottles in the unit.
ALWAYS REMOVE ALL BOTTLES BEFORE MOVING THE WINE CELLAR
8

CORD INSTRUCTIONS

OPERATING INSTRUCTIONS

W W W . V I N O T E M P . C O M
8