Handle Installation; Cleaning And Care - Vinotemp VT-188 Owner's Manual

Each cellar comes with a handle, but for convenient transportation, the
manufacturer does not install it prior to shipping. Upon receipt and
unpacking you should install the handle. You will need a flathead
screwdriver to install the parts provided with the door.
1. Put the handle on the door. (See figure 4)
2. Tighten the screws from inside of the door frame to secure the handle.
(See figure 5)
 Always unplug the wine cellar before cleaning.
 Do not use benzene, scrubbing brushes or chemical cleaners as these
will damage the unit.
 Use only a mild, nonabrasive cleanser to clean the exterior of the
cabinet.
 Clean the stainless steel door and handle by wiping with a warm water
and baking soda solution. The solution should be about 2 tablespoons
of baking soda to a quart of water.
 Wash the racks with a mild detergent solution.
 Always dry all the parts with a clean dry cloth before plugging the wine
cellar back into the receptacle.
12

HANDLE INSTALLATION

CLEANING AND CARE

W W W . V I N O T E M P . C O M
1
2