Table of Contents
Advertisement
(1) Image adjust
(2) AGC
(3) Shutter Time
(4) Sense-Up
(5) D-WDR
(6) Anti Fog
(7) Lens Distortion
Correction
(8) Video Orientation
(9) Day & Night
Brightness, Contrast, Hue, Saturation, Sharpness can be
adjusted here. The available values are: -4, -3, -2, -1, 0, 1, 2, 3,
4
The sensitivity of the camera can adjust to the environmental
lighting. Enable this function for getting brighter image on low
light, but the level of noise may also increase. The available
values are: 8x, 16x, 24x, 32x
Choose as the location of your camera or fixed shutter time.
The shorter the shutter time is the less light the camera
receives and the image becomes darker.
This function increases the sensitivity of camera to get brighter
image at night. The smaller the value you select, the slower the
shutter speed becomes so that the image will get brighter, and
moving subjects might be blurred.
Digital wide dynamic range. This function enables the camera
to reduce the contrast in the view to avoid dark zones as a
result of over and under exposure. If the Input resolution is
30fps, the default value is fixed on ENABLED. The available
values are: OFF, 1, 2, 3, 4, 5, 6, 7, 8
Improve the image clarity on environments presenting high
levels of fog or smoke.
Correct the image in the borders due to the lens angles. The
available values are: OFF, 1, 2, 3, 4, 5, 6, 7, 8
Flip or mirror the image.
The camera can detect the light level of the environment. If
you choose "Light Sensor Mode", the image will be turned
black and white at night in order to keep a clear image. To set
light sensor mode, appoint a Lux standard of switching D/N.
45
HD Ultra-mini Bullet IR IP Camera
ICA-3110
Advertisement
Table of Contents
