Table of Contents
Advertisement
RTSP Server
RTSP Authentication
RTSP port
Multicast Setting (Based
on the RTSP Server)
ONVIF
RTSP Keepalive
Bonjour
LLTD
and the function has been activated.
enable or disable RTSP server
"Disable" means everyone who knows your camera IP
Address can link to your camera via RTSP. No username
and password are required.
Under "Basic" and "Digest" authentication mode, the camera
asks the user to give username and password before
allows accessing. The password is transmitted as clear text
under basic mode, which provides a lower level of security
than under digest mode.
Make sure your media player supports the authentication
schemes
RTSP Port: setup port for RTSP transmitting (Default: 554)
RTSP Start and End Port: in RTSP mode, you may use TCP
and UDP for connecting. TCP connection uses RTSP Port
(554). UDP connection uses RTSP Start and End Port.
Multicast is a bandwidth conservation technology. This
function allows several users to share the same packet
sent from IP camera. To use Multicast, appoint IP
Address and port here. TTL means the life time of
packet, The larger the value is, and the more users can
receive the packet.
To use Multicast, be sure to enable the function "Force
Multicast RTP via RTSP" in your media player. Then key
in the RTSP path of your camera: "rtsp://(IP address)/" to
receive the multicast.
The IP camera supports ONVIF v1.01 / v1.02 / v2.10 standard
for to integration.
Under ONVIF connection, the video will be transmitted by
RTSP. Be sure to enable the RTSP server in IP setting, or
you're not able to receive the video via ONVIF.
When the function is enabled, the camera checks once in a
while if the user who links to the camera via ONVIF still keeps
connecting. If the connection had been broken, the camera
stop transmitting video to user.
This function enables MAC systems to link to this IP
camera. Key in the name here.
The web browser "Safari" also has Bonjour function. Tick
"Include Bonjour" in the bookmark setting, and you can see the
IP camera appearing under the bonjour category. Click the icon
to connect the IP camera.
If your PC supports LLTD, enable this function then you can
check the connection status, properties, and device position
(like IP address) of this IP Camera in the network map.
In the computer running Windows Vista or Windows 7, you
can find LLTD through the path:
Call out the Control Panel → Network and Internet →
Network and Sharing Center → Click "See full map"
35
HD Ultra-mini Bullet IR IP Camera
ICA-3110
Advertisement
Table of Contents
