Screenshot 2
The [Data Copy] window will be displayed.
46
Step 2
Click to select a desired camera channel to be copied.
It is possible to select two or more camera channels.
Step 3
Select a start time and an end time for copying by click-
ing the [i] button.
Step 4
Select a destination where the copied file is to be saved
from the following by clicking the [i] button.
HDD COPY AREA: Built-in hard disk of this unit
COPY1: External recording device connected to the
COPY 1 port of this unit
COPY2: External recording device connected to the
COPY 2 port of this unit
Step 5
Click the [OK] button.
→
will be displayed in the status display area
when copying starts.
When the warning window is displayed, copying will
be canceled.