Panasonic WJ-HD309 Network Operating Instructions page 28

Screenshot 3
The [VMD Search 1] window will be displayed.
Screenshot 4
The [VMD Search 2] window will be displayed.
28
.
Step 3
Click the [i] button to designate a time period and
camera channels for the VMD search.
Step 4
Click the [OK] button.
Step 5
Drag the mouse to set a detection area. Up to 4 areas
(A, B, C, D) can be set for the detection areas.
Each area will be displayed with the following colors:
White for area A, blue for area B, green for area C and
red for area D.
To delete a detection area, click the [Delete area] button
after selecting a detection area to be deleted by check-
ing it.
Step 6
Press the [i] button to select sensitivity for the select-
ed area from the following.
HIGH: High sensitivity (Detects even a slight motion)
MID: Intermediate sensitivity
LOW: Low sensitivity
OFF: Ignores motions in the selected area
Step 7
Perform the settings for the detection mode. It is possi-
ble to set how to detect motion in the motion detection
area by performing the settings for each detection
mode.
To select the desired detection mode, click the respec-
tive and perform the settings.