Panasonic WJ-HD309 Network Operating Instructions page 12

[REC] box
The recording button and the recording stop button will
be displayed when the
Displaying the recording button and the recording stop
button will be unavailable when the
[Recording] button: Starts manual recording.
[Stop recording] button: Stops manual
recording.
Notes:
• It is possible to switch between all channels or the
channel currently displayed in the web browser win-
dow to be selected for manual recording by perform-
ing the settings.
• To display the [Recording] button and the [Stop
recording] button, press down the
they are displayed.
[Download (TO PC)] box
Downloads the currently played image to a PC.
Sets the time range of a desired image to be down-
loaded by clicking the
[Cam] tab
[Zoom] box
Zooming can be adjusted by clicking the
[Wide] button or the
button.
[Focus] box
Focusing can be adjusted by clicking the
button or the
The auto focus function can be performed by clicking
the auto button.
[Autopan] box
Pans a camera automatically from the start point to the
end point registered in advance.
The auto panning function can be performed by clicking
the [ON] button. The auto panning function can
be stopped by clicking the
12
button is clicked.
button is clicked.
button until
[Start] button and the
[Tele]
[Far] button.
[OFF] button.
[End] button.
The start time and the end time for download will be dis-
played in the playback position display area.
The dialog window for saving an image to be down-
loaded onto a designated location will be displayed by
clicking the
[Viewer] button
The viewer software can be downloaded by clicking this
button. (Refer to page 63 for further information.)
[Mark] button
Mark by clicking this button during playback. When
marked, playback after searching for the marked point is
available. (Refer to page 31.)
[Text] button
The attached text information will be displayed when
this button is clicked during pausing. It is possible to edit
the displayed text information.
Control pad
Control pad/buttons
Clicking the buttons around the control pad can move
(pan/tilt) a camera in the clicked direction.
Clicking inside the control pad also can adjust the verti-
cal/horizontal position (pan/tilt) of the displayed image.
Panning/tilting speed will be faster if a clicked point gets
[Near] farther from the center point of the control pad.
[Iris] box
Iris can be adjusted by clicking the
ton or the
[Preset] box
Moves a camera to the preset position registered in
advance. Click the
preset number by clicking the
Registering preset positions is required to perform the
preset function.
[Download] button.
[Close] but-
[Open] button.
[SET] button after selecting a
button.