Panasonic WJ-HD309 Network Operating Instructions page 19

Playback on a multi-
screen
Marking
(Refer to page 31 for
operation.)
Text information
display
• Displays playback images on a 4-split screen, 9-split screen
or 16-split screen (only for the WJ-HD316).
• 4 camera images will be displayed on a 4-split screen in the
following order each time this button is clicked;
For the WJ-HD316: 1 - 4 CH → 5 - 8 CH → 9 - 12 CH
→ 13 - 16 CH → 1 - 4 CH ...
For the WJ-HD309: 1 - 4 CH → 5 - 8 CH → 9 CH
→ 1 - 4 CH ...
• 9 camera images will be displayed on a 9-split screen in the
following order each time this button is clicked;
For the WJ-HD316: 1 - 9 CH → 10 - 16 CH → 1 - 9 CH...
For the WJ-HD309: 1 - 9 CH
• Images from channels 1 - 16 will be displayed on a 16-split
screen (only for the WJ-HD316).
• Click a camera channel button in the [Camera select] box to
return to a single screen display.
• It is possible to start playback from a marked point.
Click the [Mark] button at the point to be marked.
• Up to 100 points can be registered. When more than 100
points are marked, old marked point will be overwritten by
newly marked point. In this case, the oldest point is the first to
be overwritten.
• During playback in a multi-screen, the point when the [Mark]
button is clicked for all played images will be registered. (The
number of the points for all played images in a multi-screen
will be registered simultaneously.)
• The attached text information will be displayed when this but-
ton is clicked during pausing.
Click the [Text] button after pausing playback.
• The text information display/edit is available only when a
recorded image is played in a single screen.
19