Table of Contents
Advertisement
Cleaning the Skew Sensor
Dust or paper residue on the skew sensors can cause scan quality issues or false
paper jam messages. Make sure there is no residue on the surface of the skew
sensors.
1.
Pull the Handle and open the ADF cover with a light force.
ADF Handle
2.
Remove the dust or paper residue left on the surface of the Skew Sensors (x4
1
pcs,
) with an air blower.
3.
Close the ADF by pressing down on the center of the ADF to return it to its
original position until it clicks into place.
Note:
When the ADF has returned to its original position, make sure that it is completely
closed. Feeding errors may occur if the ADF is not completely closed.
ADF Cover
110
1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Multifunction Scan Center and is the answer not in the manual?
Questions and answers