Table of Contents
Advertisement
1.
Gently place/slide the racks into the beverage cooler.
2.
Determine the best temperature setting to use.
3.
Place beverage containers inside the cooler.
4.
Plug the power cord into a standard grounded electrical outlet.
5.
Limit the frequency of opening the door to conserve energy and maintain
proper storage temperature.
6.
You can turn the interior light on and off by switching the black light button
located on the control panel into the "On" position.
Important: When using the beverage cooler for the first time, allow at least 24
hours for the internal temperature to adjust properly. Make sure there are at least
3 to 5 beverage containers in the unit.
Your beverage cooler has a temperature control knob that is located on the interior
ceiling panel.
Light Switch
Setting the temperature:
To control the internal temperature, adjust the control knob to achieve the desired
temperature. The temperature inside the beverage cooler can be adjusted from
Max Temp (level "5") to Min Temp (level "1"). To turn off the appliance, turn the
temperature control knob to the "0" setting and unplug the appliance. The
temperature range for this unit is from 32°F (0°C) to 50°F (10°C).
The cooler should be set to level "2" when ambient temperature is high (such as in
summer), and level "4" when ambient temperature is low (such as in winter).
Important: In order to operate efficiently, this product should be in an
environment with an ambient temperature of less than 90°F.
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
OPERATING INSTRUCTIONS
TEMPERATURE CONTROL
i n f o @ v i n o t e m p . c o m
Temperature Control
Knob
7
Advertisement
Table of Contents
