Cleaning And Care; Moving Your Beverage Cooler - Vinotemp VT-BLKBEV Owner's Manual

• Always unplug the beverage cooler before cleaning.
• Do not use benzene, scrubbing brushes or chemical cleaners as these will
damage the unit.
• Use only a mild, nonabrasive cleanser to clean the exterior of the cabinet.
• Clean the display door and cabinet body by wiping with a warm water and mild
detergent solution.
• Wash the racks with a mild detergent solution.
• Always dry all parts with a clean dry cloth before plugging the beverage cooler
back into the receptacle.
• When cleaning the door gasket, remove from the door then wash and dry
thoroughly before re-sealing.
• If heavy frost accumulates on the evaporator after prolonged use, empty the
contents of the cooler and disconnect the power. Frost will melt automatically.
After the frost has melted, clean up the water and re-connect the power.
• To reinstate the light bulb, remove the lamp shade and change out the old bulb
with a new one. Re-affix the lamp shade when replacement is finished.

MOVING YOUR BEVERAGE COOLER

• Always unplug the beverage cooler before moving.
• Always remove all beverage containers before moving the beverage cooler.
• Securely tape down all loose items (including shelves) inside your appliance.
• Tape the door shut.
• Be careful of cabinet legs to avoid damage when moving.
• Be sure the beverage cooler stays in the upright position during transportation
• Protect the outside of the appliance with a blanket or similar item when moving
as needed.
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1

CLEANING AND CARE

i n f o @ v i n o t e m p . c o m
9