Application - Schwank SET - SETU Owner's Manual

WARNING
Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death. Read and understand this installation and op-
eration manual thoroughly prior to assembly, installation, operation or service to
this appliance.
This heater must be installed and serviced only by a trained gas service techni-
cian.
Do not store or use gasoline or other flammable vapours and liquids in the vicinity
of this or any other gas fired appliance.
Failure to comply could result in personal injury, death, fire and/or property dam-
age.
Do not store or use gasoline or other flammable vapours and liquids in the vicinity
of this or any other gas fired appliance.
This appliance may have sharp edges and corners. Wear protective clothing such
as gloves and protective eye wear when servicing this or any other appliance.

APPLICATION

A gas-fired radiant tube heater may be installed for heating of commercial / industrial non-
residential spaces. It is beyond the scope of these instructions to consider all conditions that
may be encountered. Installation must conform with all local building codes or, in the absence
of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54 in the U.S.A. or the
Natural Gas and Propane Installation Code, CSA B149.1 in Canada. The latest edition Electri-
cal Code ANSI/NFPA N0 70 in the U.S.A. and PART 1 CSA C22.1 in Canada must also be ob-
served.
Installation of a gas fired tube heater must conform to all heating installation design procedures
including clearance to combustibles, connection to the gas and electrical supplies, and ventila-
tion.
This heater is not for installation in a Class 1 or Class 2 explosive environment, nor a resi-
dence. If installation of this equipment is in question, consult with local authorities having juris-
diction (Fire Marshall, labor department, insurance underwriter, or others).
Revisions to codes and/or standards, may require revision to equipment and installation proce-
dures. In case of discrepancy, the latest codes, standards, and installation manual will take pri-
ority over prior releases.
Models SET and ITT
residential indoor spaces.
MODELS AVAILABLE FOR OTHER APPLICATIONS:
Models SPW-JZ and IWP have a powder coated water resistant burner enclosure
and may be installed for heating of commercial / industrial non-residential outdoor
spaces and wet indoor environments.
Models STW-JZ and IW have a stainless steel water resistant burner enclosure and
may be installed for heating of commercial / industrial non-residential outdoor
spaces and harsh wet indoor environments.
SET(U)-F / ITT(U)-F Manual
IM091221
RD: FEB 2014
RL: 8B
may be installed for two stage heating of commercial / industrial non-
4