Printek FormsPro4300 Quick Reference Manual page 6

FORMS ALIGNMENT
Printek printers have 10 different form templates to modify
to standardize your print jobs. Should you need to
troubleshoot your forms alignment, please try the following
suggestions:
Horizontal Alignment
1. If your print is too far right:
Adjust the left margin within your document, on the
computer. (i.e. MS Word document, change left margin
from 1.0 to .75 inches)
2. A Floating margin vs. a Fixed margin.
Eliminate user error and always keep the floating margin
option selected and adjust the printer margin through
your software Remember, the Fixed Margin option will
affect all 10 form templates and will disable the Auto-Align
feature.
Vertical Alignment
1. If your print is too high:
a. Use the Scroll Adjust in the Forms menu to move every
line on the page down on the page in "full line"
increments.
b. Use the Print Adjust on the page in "partial line"
increments.
2. If your print is too low:
Use Print Adjust in the Forms menu to move the printed
line up on the page in "partial line" increments. Add or
subtract 1 / '' (.01388'') to finely adjust print placement.
72
Note: "Top Margin" should not be used for vertical
alignment, as it will change how your computer counts the
number of lines per page.
Printek, Inc.
1517 Townline Road
Benton Harbor, MI 49022-9697
For technical assistance:
1.800.368.4636 (choose customer service at menu)
616.925.8539 (Fax)
Copyright © 1997, Printek, Inc.
All rights reserved. Printek and the Printek logo are trademarks of Printek, Inc.
Printed in U.S.A.
5