Installation Instructions - Bellfires VENTO CLASSIC LARGE Instructions For Use & Manual Daily Maintenance

Bellfi res
1.2 CONCENTRIC FLUE SYSTEMS Ø100 MM - Ø150 MM AND
Ø130 MM - Ø200 MM : •
The gas fi re, in combination with the concentric fl ue system [Ø100 mm - Ø150 mm] and/
or [Ø130 mm - Ø200 mm] (rigid and/or fl exible) for the brands Bellfi res (Muelink & Grol
system), Poujoulat (PGI system) or Ontop (Metaloterm US system), has been approved
in accordance with the European CE-norm for gas appliances and may therefore be
used only with these systems. The permitted components for these systems are listed
in Chapter 1.6.2. The guarantee on the appliance lapses if it is installed, fully or partially,
with other components or a different fl ue system.
The concentric fl ue [Ø100 mm - Ø150 mm] and [Ø130 mm - Ø200 mm] systems can be
used with either a newly-built or existing chimney.
1.3 INCLUDED
Set documentation
Attributes
N.B. If any part is missing, please contact your dealer.
8
Bellfi res (Muelink & Grol system)
• Poujoulat (PGI system)
• Ontop (Metaloterm US system)
- Instructions for use

- Installation instructions

- Ceramic log set
English
Installation instructions