Resetting All Meter Settings - wtw pH 3110 Operating Manual

pH 3110
Resetting the meter
settings
ba75791e02 11/2008

4.6.2 Resetting all meter settings

This function resets all meter settings to the default condition. The
relevant values are given in the following sections:
System settings
Measurement settings
1 Switch on the meter with <On/Off>.
The display test appears briefly on the display.
2 During the display test, press <M> to open the menu for the
reset of the meter settings.
Init is displayed.
I n
i
n
3 Press <▲><▼> to display no or YES.
YES: Reset the meter settings.
no: Retain the meter settings.
4 Confirm with <ENTER>.
The menu is finished.
The meter switches to the measuring mode.
Note
The measuring system is not calibrated after a reset. Before
measuring, recalibrate the meter.
section 4.5.1
section 4.5.2
t
o
Operation
35