S-Video Connection - JVC HR-DVS1EK Instructions Manual

ANT. IN
RF OUT

S-VIDEO CONNECTION

To connect to a TV with S-VIDEO/AUDIO IN connectors . . .
1– Connect the aerial, recorder and TV as per "AV CONNEC-
TION" ( pg. 6).
2– Connect the recorder's S OUT connector to the TV's
S-VIDEO IN connector.
3– Connect the recorder's AUDIO OUT connectors to the TV's
AUDIO IN connectors.
ATTENTION
Do NOT Plug the mains power cord into a mains outlet until all connections are completed.
Do NOT press the
power before you start the Auto Set Up procedure described on page 8.
S-Video cable (not provided)
Audio cable
(not provided)
AV1 IN/OUT (L-1)
S OUT
(DV/VHS)
AV1 OUT
COMP. Y/C
AV2 IN/DECODER ( L-2 )
RF Cable (provided)
button on the recorder or on the remote control to turn on the recorder's
Aerial connector
S-VIDEO IN connector
AUDIO IN connectors
Mains power inlet
AUDIO
OUT
(DV/VHS)
L
R
NOTES:
You can obtain high-quality S-VHS pictures.
If your television is not stereo-capable, use the recorder's
AUDIO OUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction. (
To operate the recorder with your TV using the S-VIDEO
connection, set your TV to the AV mode.
For switching the TV's mode, refer to the instruction manual
of your television.
AFTER YOU FINISH THIS STEP
Back of TV
Mains outlet
AC IN
Back of Recorder
pg. 58)
Go to Step 3 – AUTO SET UP
7