Express Timer Programming - JVC HR-DVS1EK Instructions Manual

20
Express Timer
Programming
Before performing Express Timer Programming:
Make sure that the recorder's built-in clock is set
properly.
Select the recording deck by pressing VHS or DV.
Insert a VHS (or S-VHS) cassette with the safety tab in
place, or a Mini DV cassette with the erase protection
switch set to "REC". The recorder will come on
automatically.
Turn on the TV and select the AV mode.
8
PDC
2,3
START+/–
1,9
PROG
1
7
9
OK
T W
1 2 3
2
4 5 6
7 8 9
0
4
TV PROG+/–
DV VHS
5
4
If you don't know the PlusCode number for the programme you
wish to record, use the following procedure to set your recorder
to timer-record the programme.
ACCESS VIDEO PLUS+
SCREEN
1
Press PROG.
ACCESS PROGRAMME
SCREEN
2
Press START +/–. (If you're
just starting out, "P1"
appears.)
The front display panel looks like this:
ENTER PROGRAMME
START TIME
3
Press START +/– to enter
10
the time you want
recording to start.
6
The front display panel looks like this:
ENTER PROGRAMME STOP
TIME
4
Press STOP +/– to enter the time you want recording to
stop.
ENTER PROGRAMME DATE
5
Press DATE +/– to enter the date on which you wish to
record. (The current date first appears on screen. The
date you enter will appear in its place.)
BASIC OPERATIONS (cont.)
SP
Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
SP
Press and hold STOP +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
VHS – P1 –
START STOP
=
– –:– – – –:– –
SP VPS/PDC OFF
DATE TV PROG
– –.– – – –
[+/–] =
[PROG] : EXIT
VHS – P1 –
START STOP
=
21:00 – –:– –
SP VPS/PDC OFF
DATE TV PROG
– –.– – – –
[+/–] =
[PROG] : EXIT