JVC HR-DVS1EK Instructions Manual page 38

38
1
RECORD
START
T W
1 2 3
2
4 5 6
7 8 9
0
4
DV VHS
PAUSE
R.A. EDIT
ADVANCED OPERATIONS (cont.)
PREPARE SOURCE TAPE
10
Rewind the tape in the DV deck to the beginning of the
scene you want to edit.
ENGAGE VHS DECK TO
RECORD-PAUSE MODE
11
Press VHS, then press and hold PAUSE and press
RECORD so that the VHS deck enters the Record-Pause
mode.
START EDITING
12
Press START.
When dubbing is complete, the DV deck enters the
Pause mode, and the VHS deck enters its Record-
Pause mode.
STOP EDITING
13
Press STOP. The DV deck stops playback.
Press VHS, then press STOP. The VHS deck stops
recording.
NOTES:
When Random Assemble Editing doesn't work, press
beside the DUB button, then perform Random Assemble
Editing again.
To cancel the registered scene, press
pressed, the latest regisered scene is erased.
When the source tape has more than 2 identical time codes
( pg. 14), the recorder may not find the edit-in point you
chose and a malfunction may occur.
When choosing a scene, set edit-in and edit-out points so that
there's a relatively large difference between them.
If the search time for an in-point exceeds 5 minutes, the
recording deck's Record-Pause mode will be cancelled and
editing will not take place.
If there are blank portions before or after the edit-in and edit-
out points, a blue-backed screen may be included in the
edited version.
Since time codes register time only as accurately as seconds,
the time code total time may not match the total programme
time exactly.
To quit Random Assemble Editing while it is still in progress,
press R.A.EDIT again to return to the R.A.EDIT screen. Press
R.A.EDIT once more to return to the normal screen.
To use Random Assemble Editing consecutively for two or
more programmes, press START for each programme.
When dubbing from another Mini DV cassette, swap the Mini
DV cassettes first, and then press START.
If you use the Sepia or Monotone Playback Effect, you can't
use the Dissolve or Black & White Fader.
The Classic Film or Strobe Playback Effect does not work, if
you use the Picture Wipe or Dissolve.
The Video Echo Playback Effect does not work, if you use the
Fader, Picture Wipe or Dissolve.
You can't use some of the Fade/Wipe Effects at the beginning
or the end of the scene.
. Each time is