JVC HR-DVS1EK Instructions Manual page 79

e STANDBY/ON
recorder.
Button accesses Program screens/displays
r
to check the programme that you have pro-
grammed (next programme's information
screen/display appears each time button is
pressed). pg. 22
t – –:– – (DISPLAY) Button switches display
between clock time, tape remaining time,
counter readings and preset position*.
* Preset position is not displayed during playback.
ENTER Button is used for TV channel selection.
pg. 50
y ON/OFF Button turns on and off the playback
effect. pg. 28
u DAILY Button enables timer recording of daily
serials. pg. 19, 21
i WEEKLY Button enables timer recording of
weekly serials.
o ‰ Button engages timer-standby mode.
pg. 19, 21
p AUX Button selects recorder's auxiliary input
mode. pg. 40, 42
Q DATE +/– Button inputs date of programme for
timer recording.
W TV PROG +/– Button — same as button on
recorder. pg. 15
E VHS Button enables operations on VHS deck.
pg. 12
R DV Button enables operations on DV deck.
pg. 12
T Fast Forward [FF] Button — same as button on
recorder. pg. 12, 13
Y Play Button — same as button on recorder.
pg. 12, 13
U Pause Button — same as button on recorder.
pg. 13
@ #
Button initiates functions such as Index
I
Search pg. 29, variable-speed search, frame
by frame playback.
TV +/–Button controls volume of connected
TV. pg. 50
O R.A. EDIT Button accesses R.A. EDIT screen.
pg. 36
P IN/OUT Button registers edit-in or edit-out
point for Random Assemble Editing.
a JOG/SHUTTLE Button enables use of the
remote control's JOG dial/SHUTTLE ring.
pg. 13
s SHUTTLE Ring performs forward and reverse
slow-motion and search during Still or Play
mode. pg. 13
Button — same as button on
pg. 19, 21
pg. 20
pg. 13
pg. 36
How To Use
The remote control can operate most of your video recorder's
functions, as well as basic functions of TV sets and satellite
receivers of JVC and other brands.
Point the remote control toward the sensor window.
The maximum operating distance of the remote control
is about 8 m.
NOTES:
When inserting the batteries, be sure to insert in the
correct directions as indicated under the battery cover.
pg. 17
If the remote control doesn't work properly, remove its
batteries, wait a short time, replace the batteries and then
try again.
79
pg. 50, 51.