Understanding Feature Buttons And Menus - Cisco 7975G Quick Manual

Unified ip phone
Hide thumbs


Cisco Unified IP Phone 7965G and 7945G
Use only a soft, dry cloth to wipe the phone screen. Do not use any liquids or powders on the phone,
as they can contaminate phone components and cause failures.
When the phone is in power save mode, the touchscreen is blank and the Display button is not lit.
When the phone is in this condition, you can clean the screen, as long as you know that the phone will
remain asleep until after you finish cleaning. If the phone is likely to wake up during cleaning, wait
until it is awake before following the preceding cleaning instructions.
If you want to...
Wake the phone screen
from power save mode

Understanding Feature Buttons and Menus

Press a feature button to open or close a feature menu.
If you want to...
Open or close a feature
Scroll through a list
or menu
Go back one level in a
feature menu
Switch between open
feature menus
Press any button or lift the handset.
After a period of inactivity (determined by your system administrator), the
phone screen enters the power save mode to save power. In this mode, the
phone screen appears blank and the Display button
Press a feature button:
Press the Navigation button.
Press Exit. Pressing Exit from the top level of a menu closes the menu.
Press a feature tab. Each feature menu has a corresponding tab. The tab is
visible when the feature menu is open.
remains lit.



  Also See for Cisco 7975G

  Related Manuals for Cisco 7975G

This manual is also suitable for: