Cleaning The Phone Screen; Understanding Feature Buttons And Menus - Cisco 7962G User Manual

Cleaning the Phone Screen

Use only a soft, dry cloth to wipe the phone screen. Do not use any liquids or powders on the phone,
because they can contaminate phone components and cause failures.
When the phone is in power save mode, the touchscreen is blank and the Display button is not lit.
When the phone is in this condition, you can clean the screen, as long as you know that the phone will
remain asleep until after you finish cleaning. If the phone is likely to wake up during cleaning, wait
until it is awake before following the preceding cleaning instructions.
If you want to...
Wake the phone screen
from power save mode

Understanding Feature Buttons and Menus

Press a feature button to open or close a feature menu.
If you want to...
Open or close a feature
menu
Scroll through a list
or menu
Go back one level in a
feature menu
Switch between open
feature menus
8
Then...
Press any button or lift the handset.
After a period of inactivity (determined by your system administrator), the
phone screen enters power save mode to save power. In this mode, the
phone screen appears blank and the Display button
Then...
Press a feature button:
Messages
Services
Directories
Settings
?
Help
Press the Navigation button.
Press Exit. Pressing Exit from the top level of a menu, closes the menu.
Press a feature tab. Each feature menu has a corresponding tab. The tab is
visible when the feature menu is open.
remains lit.
OL-22333-01