2.
Use [
][
] to select "Encryption" and press
[Enter].
•
The encryption settings screen is displayed.
3.
Use [
][
] to select the following items for input:
Note
•
When "SIP" is set to "OFF" on the call type
settings screen (Page 109), "Access
mode (SIP)", "Encryption (SIP)" and
"Encryption Key (SIP)" cannot be set.
•
When "H.323" is set to "OFF" on the call
type settings screen (Page 109), "Access
mode (H.323)" and "Encryption (H.323)"
cannot be set.
"Access mode (SIP)"/"Access mode (H.323)":
Use [
][
] to select "Admin" (default) or
"User".
•
When "Admin" is selected, only the network
administrator can enable/disable encryption.
•
When "User" is selected, any users can
enable/disable encryption (Page 93,
Page 120).
"Encryption (SIP)"/"Encryption (H.323)": Use
[
][
] to select whether to enable encryption.
–
"ON": Encryption is enabled.
–
"OFF" (default): Encryption is disabled.
Note
•
If the "Encryption (SIP)"/"Encryption (H.
323)" setting does not match that of the
other party in a video conference call, the
video conference call will not start.
•
This setting is available only when
"Admin" is selected for "Access mode
(SIP)"/"Access mode (H.323)".
"Encryption Key (SIP)": Enter an encryption key
(4 to 256 characters [alphanumeric, space,
symbols]) (Page 125).
Note
•
&, <, >, comma (,), double quotation mark
(") cannot be entered.
•
While being entered, the characters of the
encryption key are displayed, but once the
settings are saved, all the characters will be
displayed as asterisks (*), and you will no
longer be able to check the encryption key
on the screen. Record the encryption key
beforehand, and store it in a safe location.
•
If the value specified in "Encryption Key
(SIP)" does not match the other party's, the
video conference call will not start even if
encryption is enabled.
•
When the encryption key is displayed as
asterisks (*), pressing [Y] deletes the entire
encryption key.
4.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
5.
Use [
][
] to select "Yes" and press [Enter].
•
The admin menu screen is displayed.
6.
Press [Home].
•
The Home screen is displayed.
Making Software Update
Settings
Preparation settings for updating the software can be
made here.
Note
•
The DNS server setting is necessary to check
for upgrades and to download the latest
software from the network (Page 91).
1.
Login to the administrator menu (Page 105).
•
The admin menu screen is displayed.
Contacts and Settings
User Manual
107