Contacts and Settings
•
When "Admin" is selected, only the network
administrator can change the encryption
setting.
•
When "User" is selected, any users can
change the encryption setting (Page 77,
Page 91).
"Encryption": Use [
enable encryption.
–
"ON": Encryption is enabled.
–
"OFF" (default): Encryption is disabled.
Note
•
If the "Encryption" setting does not match
that of the other party in a video conference
call, the video conference call will not start.
•
This setting is available only when
"Admin" is selected for "Access mode".
•
When connecting to an MCU or
non-Panasonic video conference system,
set "Encryption" to "OFF" because
encryption is not available. Encryption must
be disabled on both sides.
4.
Press [G].
•
A dialog box to confirm the saving of settings is
displayed.
5.
Use [
][
] to select "Yes" and press [Enter].
•
The admin menu screen is displayed.
6.
Press [Home].
•
The Home screen is displayed.
Making Software Update
Settings
Preparation settings for updating the software can be
made here.
1.
Login to the administrator menu (Page 84).
•
The admin menu screen is displayed.
86
Operating Manual
][
] to select whether to
2.
Use [
][
] to select "Update Settings" and
press [Enter].
•
The update settings screen is displayed.
3.
Use [
][
] to select the following items for input:
"DNS Server Addr.": Enter the IP address of the
DNS server.
•
If the IP address contains 1 or 2 digit numbers,
enter these numbers as they are. Do not enter
like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
"Proxy Server Addr.": Enter the IP address of the
proxy server.
•
If the IP address contains 1 or 2 digit numbers,
enter these numbers as they are. Do not enter
like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
"Proxy Server Port": Enter the proxy server port
number (1–65535).
"Automatic Version Check": Use [
select "ON" or "OFF" (default).
•
When "ON" is selected, the unit will
automatically look up the DNS server or proxy
server to see if there are updates for your
software on start-up. If updates are available, a
dialog box is displayed on the Home screen.
•
When "OFF" is selected, the unit will not
automatically look up the DNS server or proxy
server to see if there are updates for your
software on start-up.
][
] to
Document Version 2011-02