Duplicate - Sunwave Tech. SRC-7000 User Manual

SRC-7000 User's Manual

4.5 Duplicate

Duplicate
With the function, you are able to transfer your settings to the other
SRC-7000 with SLC-2080 USB cable.
1. Please connect two SRC-7000s A and B, by SLC-2080 USB
cable.
2. If you intend to transfer the settings in A to the other one, please
select the "A" SRC-7000 to start the duplication.
3. Please press the
"Setup Menu". And then enter
4. On pressing the soft key, you will see a message to confirm your
decision.
5. If you decide to duplicate these settings. Please tap "Yes" and
start the duplication.
58
You can connect two SRC-7000s with SLC-2080
USB cable. And then you duplicate the settings in
one remote and transfer them to the other one.
button for about 3 seconds to enter the
If you have lots of settings in the original remote, it
will take more time to duplicate the settings for the
other remote.
Duplicate directly.