Table of Contents
Advertisement
6. Please select the brand of your device. You just need to select the
first letter of your brand. For example, if your device belongs to Sony,
please select "S" as your brand .
In this page, you will find out an icon
function. You can key in the code number for your device
directly. In this way, you are able to save the time to load the
corresponding codes. However, each brand may have several
remote codes. You may need to load the remote codes for
some times to find out the correct codes for your device.
7. After selecting "Brand" item , please make sure that the device is
turned on.
8. Please have the SRC-7000 pointed at your device and tap
soft button to start auto searching.
9. When your device is turned on again, please press any rubber key to
double confirm the remote codes.
10. Please press
codes are suitable for your device.
11. If they also work, it means that you have already found the correct
remote codes. Please press
12. If they don't work, please repeat step6 and step7.
Chapter 3 How to Set Your SRC-7000
or
or
key to ascertain that the remote
button to confirm your decision.
. It is "Key Pad Entry"
35
Hide quick links:
Advertisement
Table of Contents
