Sunwave Tech. SRC-7000 User Manual page 39

1. Please press the
Menu. And then enter "Code Setting" menu.
2. Please choose the "
button to enter the submenu.
3. You will see the help guide for the learning function. After reading the
tips, please press the
4. Please select the device which you want to catch the remote codes.
5. After pressing the device key, the specific key needs to be learned
will be shown in black on LCD. SRC-7000 will automatically guide
you to learn the remote code for each key one by one. However, you
can also change the sequence as your will by taping any key you
want to learn.
6. At the moment, please have your original remote pointed to the
"Learning Eye" port at the bottom of SRC-7000. And then press the
Chapter 3 How to Set Your SRC-7000
button for about 3 seconds to enter Setup
Learning" item and then please press the
button to go to the next step.
=
The first page you see will guide you to learn each remote
code for the rubber keys on SRC-7000.
37