Sunwave Tech. SRC-7000 User Manual page 27

1. When you successfully add a new device, please decide if you
continue to load the codes for the device. Choose the
" learning" item, to get the remote codes.
2. The specific key needs to be learned will be shown in black on
LCD. SRC-7000 will automatically guide you to learn the
remote code for each key one by one. However, you can also
change the sequence as your will by taping any key you want
to learn.
=
The first page will guide you to learn the rubber keys on
SRC-7000 step by step.
3. 3. At the moment, please have your original remote pointed to
"Learning Eye" (P.8) at the bottom of SRC-7000. And then
press the corresponding key on your original remotes for about
2-3 seconds until the symbol
4. The symbol
codes successfully. However, the symbol
Chapter 3 How to Set Your SRC-7000
shows up on LCD.
will show up when SRC-7000 learns remote
will show up
25