Sunwave Tech. SRC-7000 User Manual page 41

3. On pressing the soft key, you will see the direction for the function.
After reading the tips, please press the
step.
4. Please choose any of keys (except Device key) you will use as Cycle
keys.
5. Please have your original remote pointed to the "Learning Eye" at the
bottom of SRC-7000. And then press the corresponding key on your
original remotes for about 2-3 seconds until the symbol
up on LCD.
You can save 6 cycle commands at most in the Cycle key.
6. Please press the
of commands.
Chapter 3 How to Set Your SRC-7000
button when you finish learning all the circle
When you have saved some commands in a
Cycle keys, a specific sign will be marked on
the Cycle key.
button to go to the next
shows
39