Tripp Lite B136-101 Owner's Manual page 6

Extender/Splitter Installation
1
2
3
4
5
6
7
8
9
201102138 932999.indb 6
Make sure the A/V source is powered OFF.
Connect the source to the ports on the B136-004
labeled SOURCE using Tripp Lite A008-Series
Component Video and A050-Series Stereo Audio
Cables.
Optional: Connect a local A/V device to the ports
on the B136-004 marked LOCAL using Tripp Lite
A008-Series Component Video and A050-Series
Stereo Audio Cables.
Connect the external power supply to the B136-
004 local unit and plug it into a Tripp Lite Surge
Suppressor, PDU or Uninterruptible Power Supply
(UPS). The red LED will illuminate to indicate power
is being received from the external power supply.
Using Cat5e/6 cable, connect one of the RJ45
output ports on the B136-004 to the RJ45 input
port on the B136-100 or B136-100-WP-1 remote
unit.
Repeat step 5 for each additional remote unit you
are connecting.
Connect the B136-100 component video and
stereo audio connectors to the A/V device, or
connect the B136-100-WP-1 to the A/V device
using Tripp Lite A008-Series Component Video and
A050-Series Stereo Audio Cables.
Repeat step 7 for each additional A/V device you
are connecting.
Turn on the power to the A/V source.
6
3/8/2011 12:00:17 PM