Tripp Lite B136-101 Owner's Manual page 11

Extender Kit Installation
1
2
3
4
5
201102138 932999.indb 11
Make sure the A/V source is powered OFF.
Connect the component video and stereo audio
connectors on one of the B136-101 units to the
A/V source; or, connect one of the B136-101-
WP-1 wallplates to the A/V source using Tripp Lite
A008-Series Component Video and A050-Series
Stereo Audio Cables.
Using Cat5e/6 cable, connect the RJ45 port on
the local unit to the RJ45 port on the remote unit.
Connect the remote B136-101 unit's component
video and stereo audio connectors to the A/V
device; or, connect the remote B136-101-WP-1
wallplate to the A/V device using Tripp Lite A008-
Series Component Video and A050-Series Stereo
Audio Cables.
Turn on the power to the A/V source.
11
3/8/2011 12:00:18 PM