Rider Seat; Helmet Holder - Yamaha XV19CSY Owner's Manual

Table of Contents

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS

Rider seat

To remove the rider seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
4
1. Seat lock
2. Unlock.
2. While holding the key in that posi-
tion, lift the front of the seat up, and
then pull the seat off.
To install the rider seat
1. Insert the projection on the rear of
the seat into the seat holder as
shown.
EAU34042
1. Projection
2. Seat holder
2. Push the front of the seat down to
lock it in place.
3. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.
4-12

Helmet holder

1. Helmet holding cable
2. Helmet holder
The helmet holder is located under the
rider seat. A helmet holding cable is
provided under the rider seat to secure
a helmet to the helmet holder.
To secure a helmet to the helmet
holder
1. Remove the rider seat. (See page
4-12.)
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loop over the helmet holder.
EAU44441

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xv19cyXv19cscXv19ccStar

Table of Contents