White Balance - Santec VTC-279IRPWD User Manual

Bedienungsanleitung / User Manual
VTC-279IRPWD / VTC-280IRPWDU / VTC-289IRPWD
Backlight:
o BLC (Backlight Compensation):
If the object is exposed to strong backlight, you can enable the BLC function
in order to achieve a clear picture of both the object itself and the background.
BLC Mode:
BLC Level:
o HLC (Highlight Compensation):
Highlights in the picture (e.g. caused by a car's lights) are removed which
makes the picture sharper.
HBLC:
Mode:
HLC Level:
Mask 1-4:
o D-WDR (Digital Wide Dynamic Range):
D-WDR lights up dark areas in the picture in order to even out differences in
brightness in the picture without losing contrast.
3D-DNR:
Background noise can be reduced by a 3D filtering system.
Note: If AGC is off, the 3D-DNR function is off, too.

5.4 White balance

ATW Mode:
Automatic white balance.
R-Y Gain:
Set the red value (0 – 255).
B-Y Gain:
Set the blue value (0 – 255).
_________________________________________________________________________________
Auto, manual
High, mid, off
Simultaneous function of BLC and HLC.
HLC may be active all the time (i.e. at day and at night) or at
night only.
Set the HLC level.
Define the areas 1-4.
- 35 -