Philips VL440 Spot User Manual page 92

❋
VARI LITE - VL440 / VL770 / VL880 L
Display
Gobo
GobIndx
Index
InvPan
InvTilt
Lamp
Lamp
OFF
Lamp ON
Lamp
Hour
LumId
Magenta
Manual
Model
Move-
ment
NoProg
OFF
OK
OK?
ON
Pan/Tilt
Pan
PASS
Power
Power Up
Re-cal
Reset Def
Reset Hrs
RotGobo
RunTest
Sensor
Sens Tst
SetUp
Status
74
UMINAIRE
Table 4-2: Menu Function Definitions (Continued)
Definition Purpose
Gobo Select Specifies rotating gobo select for manual control ( Man ) or gobo select EOT sensor
for testing ( Test ).
Gobo Indexes Specifies rotating gobo select sensor for testing ( Test ).
Gobo Index Specifies rotating gobo index for manual control ( Manual ).
Invert Pan Reverses pan action for special focus requirements.
Invert Tilt Reverses tilt action for special focus requirements.
Lamp Options For accessing lamp options and configuration ( Config ) or for testing (Test) to disable
pan/tilt for lamp adjustment.
Lamp Off Configures arc luminaire to strike lamp on manual command.
Lamp On Configures arc luminaire to strike lamp at power up.
Lamp Hours Displays total number of lamp operating hours.
Luminaire ID Displays unique identification number for the luminaire.
Magenta Color Specifies Magenta color wheel for manual control ( Manual ) or for testing ( Test ).
Wheel
Manual Accesses functions for controlling luminaire mechanisms and timing by entry of an
Commands absolute data value.
Model Displays type of luminaire ( Spot or Wash ).
Movement Enables and disables pan and tilt movement and auto-correction.
No Program Indicates that there is no software present in the luminaire.
Off Turns off a function.
Okay Indicates that luminaire is ready to accept commands.
Okay? Prompt for pressing [Enter] before an action is executed.
On Indefinitely Sets Menu Display to stay on until programmed otherwise ( Display ), turns on a
function, or turns on a menu item.
Pan/Tilt Accesses pan and tilt options for DMX function, system configuration, and testing.
Pan Specifies pan function for manual control ( Manual ) or pan encoder for testing ( Test ).
Test Pass Indicates that sensor test has passed.
Lamp Power Accesses function to turn lamp on or off.
Lamp Power Up Accesses options for lamp power up: on, off, or after calibration.
Recalibrate Recalibrates luminaire.
Reset Default Resets default system configuration values.
Reset Lamp Info Resets lamp hour and lamp strike counters. For use when new lamp is installed.
Rotating Gobo For setting ( Manual ) or testing ( Test ) rotating gobo wheel or sensor.
Run Test Indicates that a system test is in progress.
Sensors Accesses sensor choices for diagnostic testing.
Sensor Test Indicates that a system sensor test is in progress.
Luminaire Set Up For selecting which ( Model ) of luminaire - spot or wash.
Status/Error Display Provides the status of the fixture ( Fixture ) and any error messages.
U ' M
SER S ANUAL
26 J uly 20 11 02 .9 687.00 01 0