Philips VL440 Spot User Manual page 65

DMX Channel Parameters
29 Gobo Time
30 Control
Notes:
Default Values: *Denotes recommended console default settings.
Use of Timing Channels: The default value setting in the profile should be 255 (proportional control) to allow smooth
movement when using console timing. The Timing channel data should change as a snap. A zero value will give the
fastest move but without any smoothing, this can look steppy in console-timed moves.
To use a timing channel instead of console timing it is necessary to set the timing channel to the desired value and set cue
and/or parameter time to zero. A combination of time controls can produce unexpected results. Refer to
Timing" on page 48
Timing Channel Control: The luminaire uses the timing channel value to calculate a smooth continuous movement for a
given time and transition.
02.96 87.000 1 0
Table 12: VL880 Spot Channel Mapping
Range (DMX) Range (%)
0 - 255 0 - 100%
0 - 255 0 - 100%
for more information.
26 J uly 20 11
O : DMX O
PERATION
Default Value* Description
Allows for luminaire timing of gobo wheel func-
255 tions. Profile should default to DMX 255 for
smoothest console timing.
Used to strike/douse the lamp, set lamp levels,
and other various functions, as well as resetting
the luminaire via the console. DMX values are:
Default Console Value (Idle) = DMX 0
Display-Menu Settings/Off = DMX 3 - 4
Reset Fixture to Defaults = DMX 5 - 7
Fans Constant = DMX 11 - 13
Fans Auto = DMX 14 - 16
Full Luminaire Recal = DMX 81 - 87
0 ReCal Color = DMX 100 - 104
ReCal Gobo = DMX 112 - 116
ReCal Beam = DMX 126 - 130
ReCal Dim/Strobe = DMX 138 - 142
Lamp OFF = DMX 165 - 171
Lamp @ Stand-by (Quiet) = DMX 176 - 181
Lamp @ Full = DMX 199 - 204
Lamp Strike = DMX 249 - 255
When resetting fixtures to Defaults, settings in
Bold will be activated.
3
PERATION
"Luminaire
47