Philips VL440 Spot User Manual page 59

DMX Channel Parameters
Prism Rotate -
20
High
Prism Rotate -
21
Low
22 Not Used
23 Not Used
24 Not Used
25 Not Used
26 Focus Time
27 Color Time
28 Beam Time
29 Gobo Time
30 Control
Notes:
Default Values: *Denotes recommended console default settings.
Use of Timing Channels: The default value setting in the profile should be 255 (proportional control) to allow smooth
movement when using console timing. The Timing channel data should change as a snap. A zero value will give the
fastest move but without any smoothing, this can look steppy in console-timed moves.
To use a timing channel instead of console timing it is necessary to set the timing channel to the desired value and set cue
and/or parameter time to zero. A combination of time controls can produce unexpected results. Refer to
Timing" on page 48
Timing Channel Control: The luminaire uses the timing channel value to calculate a smooth continuous movement for a
given time and transition.
02.96 87.000 1 0
Table 10: VL440 Spot Channel Mapping
Range (DMX) Range (%)
0 - 65535 0 - 100%
- -
- -
- -
- -
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
for more information.
26 J uly 20 11
O : DMX O
PERATION
Default Value* Description
16 bit control of prism index or rotation.
32768 Rotate Fast to Slow << = DMX 0 - 32755
Rotate STOP = DMX 32756 - 32780
Rotate Slow to Fast >> = DMX 32781 - 65535
- For Future Use
- For Future Use
- For Future Use
- For Future Use
Allows for luminaire timing of pan and tilt. Profile
255 should default to DMX 255 for smoothest console
timing.
Allows for luminaire timing of color wheel func-
255 tions. Profile should default to DMX 255 for
smoothest console timing.
Allows for luminaire timing of beam functions.
255 Profile should default to DMX 255 for smoothest
console timing.
Allows for luminaire timing of gobo wheel func-
255 tions. Profile should default to DMX 255 for
smoothest console timing.
Used to strike/douse the lamp, set lamp levels,
and other various functions, as well as resetting
the luminaire via the console. DMX values are:
Default Console Value (Idle) = DMX 0
Display-Menu Settings/Off = DMX 3 - 4
Reset Fixture to Defaults = DMX 5 - 7
Fans Constant = DMX 11 - 13
Fans Auto = DMX 14 - 16
Full Luminaire Recal = DMX 81 - 87
0 ReCal Color = DMX 100 - 104
ReCal Gobo = DMX 112 - 116
ReCal Beam = DMX 126 - 130
ReCal Dim/Strobe = DMX 138 - 142
Lamp OFF = DMX 165 - 171
Lamp @ Stand-by (Quiet) = DMX 176 - 181
Lamp @ Full = DMX 199 - 204
Lamp Strike = DMX 249 - 255
When resetting fixtures to Defaults, settings in
Bold will be activated.
3
PERATION
"Luminaire
41