Receiver Volume Adjustment (Applicable To The American Version Only - Brother FAX4759 Service Manual

Table of Contents

Advertisement

3.8

Receiver Volume Adjustment (applicable to the American version only)

n n
Function
The HIGH level of the handset receiver's volume will be influenced by the characteristics of the
FET on the main PCB, so it requires fine adjustment according to the procedure given below.
n n
Operating Procedure
(1) Connect the telephone line cord to the modular jack of the facsimile equipment and the
telephone wall socket.
(2) Pick up the handset and listen to the dial tone. If the receiver volume is not appropriate,
proceed to the following steps:
(3) Press the 1 and 6 keys in this order in the initial stage of the maintenance mode.
The LCD shows the current receiver volume (default: HIGH).
(4) If the current receiver volume is not HIGH, use the right or left arrow key to choose HIGH.
(5) Press the Start key.
The equipment enters the receiver volume adjustment mode and shows the PWM duty ratio
at the right end of the LCD.
(6) Adjust the receiver volume by using the 1, 3, 4, or 6 key.
1 key: Decrease 10H
3 key: Increase 10 H
4 key: Decrease 1H
6 key: Increase 1H
(7) To escape from the receiver volume adjustment mode, press the Set key.
The LCD shows the "PWM SETTING." One second later, the LCD returns to the screen
shown in step (3).
(8) To return the equipment to the initial stage of the maintenance mode, press the Stop key.
V - 57
manuals4you.com
manuals4you.com

Advertisement

Table of Contents
loading

Table of Contents