Brother FAX4759 Service Manual page 141

Selector
No.
1
Selection of redial interval
2
3
| No. of redialings
6
Redialing for no response sent
7
from the called terminal
8 Not used.
NOTE: Selector 7 is not applicable in those countries where no busy tone detection is supported.
Selectors 1 through 6: Selection of redial interval and No. of redialings
l
The equipment redials by the number of times set by selectors 3 through 6 at intervals set by
selectors 1 and 2.
This setting is effective only when selector 7 is set to "0."
l Selectors 7: Redialing for no response sent from the called terminal
This selector determines whether or not the equipment redials if no G3 command response comes
from the called station after dialing within the time length set by selectors 7 and 8 of WSW09.
WSW15
(REDIAL facility setting)
Function
V - 28
Setting and Specifications
No. 1 2
0 0 : 5 minutes
0 1 : 1 minute
1 0 : 2 minutes
1 1 : 3 minutes
No. 3 4 5 6
0 0 0 0
0 0 0 1
0 0 1 0
0 0 1 1
|
1 1 1 1
0: Redialing
: 16 times
: 1 times
: 2 times
: 3 times
|
: 15 times
1: No redialing