Installation Procedure - Konica Minolta bizhub C3850 User's Manual Print Functions

2.1 Preparation for printing (network connection)

Installation procedure

Install the printer driver using the installer.
0
Administrator privileges are required to perform this task.
0
Use the Drivers & Utilities CD-ROM.
1
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
% Make sure that the installer starts, then proceed to Step 2.
% If the installer does not start, open the printer driver folder on the CD-ROM, double-click [Set-
up.exe], then go to Step 3.
% If the [User Account Control] window appears, click [Continue] or [Yes].
2
Click [Printer/FAX].
3
Read the license agreement, then click [AGREE].
4
Check the contents of the [Readme] window, then click [Next].
5
Select [Install printers/MFPs], then click [Next].
Connected printers are detected.
% For Windows Vista/7/8/Server 2008/Server 2008 R2/Server 2012, you can select [Preference for
IPv4] or [Preference for IPv6]. The address has the preference when detected in both IPv4 and IPv6.
6
Select this machine, then click [Next].
% If this machine is not detected, restart it.
% You do not need to change the printing method from [Normal Printing] (Port 9100) unless otherwise
specified by the administrator.
% As the printing method, you can select [Normal Printing], [Internet Printing] (IPP), or [Secure Printing]
(IPPS).
% Among the connected printers, only the target model is automatically detected and displayed. If
multiple target models are displayed, check the IP addresses.
% If the connection to this machine cannot be recognized, it is not displayed in the list. In such a case,
select [Specify the Printer/MFP Except for the Above. (IP Address, Host Name...)], then manually
specify the IP address and host name of this machine.
[Print Functions]
2
2-6