8. Service Mode functions
8.7
HDD installation setting
• HDD installation setting sets whether the hard disk is installed or not.
• Changing the HDD installation setting from "Installed" to "Not Installed" will clear the fol-
lowing types of data. Do not do that carelessly.
If the HDD installation setting is made again, be sure to make the settings again for those
that have been changed. (Have the administrator make the settings again for the setting
items of Administrator Settings.)
Item
Enhanced Security Mode
User Authentication
Box functions
NOTE
• If the HDD installation setting is changed to "Not Installed" and then back to
"Installed" again, reusing the original hard disk will allow image files stored in the
box or secure print documents to be used. Note, however, that all boxes become
Public.
8.7.1
HDD installation setting procedure
1. Call the Service Mode to the screen.
See P.4
2. Touch [System 2].
3. Touch [HDD].
4. Touch [Installed] or [Not Installed].
5. Touch [END] and exit the Service Mode.
28
Security Function Ver. 1.02 Jun. 2011
Enhanced Security Mode is set to [OFF].
User Authentication is set to [OFF], and the following setting
is set to "Restrict."
• Public User
• User Name List
• Print without Authentication
It is not possible to use.
Details
A1UDS1E029DA