Setting Cable Box Output Channel & Brand - JVC HR-S9800U Instructions Manual

Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
3 4
3 4
2
VCR TV CABLE/DBS
1
4
7
3 4
2
2 3
5 6
8 9
0
3 4
Setting cable box output
channel & brand
After installation, set the cable box output's channel and
its brand correctly; otherwise, the Controller cannot
work correctly.
1
Turn on cable box
Select a channel other than channel 9 on your
cable box.
2
Access Main Menu screen on VCR
Press MENU.
3
Access Initial Set screen
On the front panel:
Press CH5∞ to move the highlight bar (arrow) to
"INITIAL SET", then press OK.
On the Remote:
Press %fi to move the highlight bar (arrow) to
"INITIAL SET", then press OK or #.
4
Access Cable Box Set screen
On the front panel:
Press CH5∞ to move
the highlight bar (arrow)
to "CABLE BOX SET",
then press OK.
On the Remote:
Press %fi to move the
highlight bar (arrow) to "CABLE BOX SET", then
press OK or #.
CONTINUED ON NEXT PAGE \
17
EN
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
= CABLE BOX SET
DBS RECEIVER SET
JLIP ID NO. SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END